Buy Forrest DH08607125 Duraline HI-A/T 8-Inch 60 Tooth 5/8-Inch Arbor .125-Inch Kerf Melimine & Plywood Cutting Circular Saw BladeForrest DH08607125 Duraline HI-A/T 8-Inch 60 Tooth 5/8-Inch Arbor .125-Inch Kerf Melimine & Plywood Cutting Circular Saw Blade Product Description:
- Recommended for: Thin, Low Pressure, Two-Sided Laminates, Plywood & Fine Cross Cutting on all Woods
- Also for chipless cutting of two-sided melamine (MCP Board), Vinyl, Polyester, Kortron, Veneer Plywood. No Scoring Blade Needed
- Double Hard And 40% Stronger C-4 Carbide Will Give Up To 300% Longer Life Between Sharpenings
- Ends second-step finishing (jointing and sanding not required).
- 40-degree Points Slice Through Thin Bottom Layers With No Tears Or Chips
Product Description
Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Recommended for: thin, low pressure, two-sided laminates, plywood & fine cross cutting on all woods. Eliminates need for a small scoring saw blade on table saw work. The 40° points slice through thin bottom layers with no tears or chips. Reduced yearly sharpening costs - less machine downtime.Saves 1/3 wood loss on each cut.Feeds easily when used for moderate rips and crosscuts on a table saw.Reduces 'JUMP IN' for better 'PULL-CONTROL.'Eliminates bottom splintering on RADIAL CROSSCUTS.With new 30�� ATB tooth style this blade stops totally, ALL bottom and top splintering on ply veneers on both radial and table saw machines
Customer Reviews
Most helpful customer reviews
0 of 0 people found the following review helpful.
Nice cuts
By C. Grey
I use this blade on my fixed panel saw. Pricey but makes a nice clean cut. I've used the Forrest WoodWorker II on my table saw for years and this one is the same quality. I was so sold, I put a 12" Forrest on my cutoff saw and really happy with the results.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
