Buy Blue Sea Systems Solenoid SI Series (120A 12/24V ACR)Blue Sea Systems Solenoid SI Series (120A 12/24V ACR) Product Description:
- Protects sensitive electronics by temporary isolation of house loads from engine circuit during engine cranking
- Designed for 12 or 24 volt systems; 12/24 volt auto ranging voltage input
- Hermetically sealed contacts/vaporproof
- Waterproof rated IP67?temporary immersion for 30 minutes
- Ignition protected?safe for installation aboard gasoline powered boats
Product Description
7610
120 Amp SI-Series Automatic Charging Relay
- Allows temporary isolation of house loads from engine circuit during engine cranking to protect sensitive electronics
- Automatically combines battery banks during the charging cycle and isolates under discharge
- 12/24 Volt auto ranging voltage input
- Waterproof rated IP67 - temporary immersion for 30 minutes
- Ignition protected - safe for installation aboard gasoline powered boats
- Remote LED output indicates relay state away from ACR
- LED light indicates when batteries are combined
- LED blinks in undervoltage lockout and starting lockout
- Supports high-output alternators up to 120 Amperes
- Included with the ADD A BATTERY Dual Circuit System
- Automatically combines battery banks during the charging cycle and isolates under discharge
- Ignition protected - safe for installation aboard gasoline-powered boats
- Activates from any charging source - alternators, battery chargers, or solar panels
- Hermetically sealed contacts / vaporproof
- Side and bottom knockouts for power cable connections
- Clip-on cover protects and insulates terminal connections
- Tin-plated copper studs for maximum corrosion resistance
- 7/8" (22.22mm) stud length to accept multiple cable terminals
- 1/4" x 0.031" male quick connect terminals for ground and remote LED and starting interrupt
Customer Reviews
Most helpful customer reviews
2 of 2 people found the following review helpful.
Great charging relay for a second battery in VW vanagon
By Daniel A. Keener
It was super easy to install. One wire coming from the main battery, going into side A. One wire going from side B to the second battery, and a ground! I have a Power Bright PW1100-12 Power Inverter 1100 Watt 12 Volt DC To 110 Volt AC hooked up to the spare battery. The inverter has a led readout that shows amps left on the battery, and it verified that the relay was charging the second battery.By far the easiest setup for charging an extra battery!The unit itself feels very sturdy, and mounted very easily.There are break away tabs on the cover, so the wires can come out either to the front, or the sides.I would definitely recomend this unit!
0 of 0 people found the following review helpful.Perfect. Install it. Forget about it.
By Dano
This thing is perfect. Install a second battery, and you never have to worry about your starting battery running down from running stereo and lights while the motor is off.Every boat that anchors and uses lights or stereo should have one of these with a second battery. It would put the towing companies out of business.
0 of 0 people found the following review helpful.Easy quick and automatic
By Timo
Sure, you could save a couple of dollars with a few manual switches that you have to fiddle with. Not here. Plug and play. It could not be simpler. I like it!
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
