Buy Forrest MM12106 Miter Master 12-Inch 100 Tooth 5/8-Inch Arbor .105-Inch Kerf Wood Cutting Circular Saw BladeForrest MM12106 Miter Master 12-Inch 100 Tooth 5/8-Inch Arbor .105-Inch Kerf Wood Cutting Circular Saw Blade Product Description:
- 20° Face Hook for easy feed
- DOUBLE HARD and 40% STRONGER C-4 CARBIDE will give up to 300% longer life between sharpenings.
- Ends second-step finishing (jointing and sanding not required).
- Buy and sharpen ONE blade instead of 3, (24T Rip, 50T Combination, 80T Crosscut).
- Ends cutting 1/16" oversize to allow for RESURFACING
Product Description
Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 2 Saw Blade For Table Saws. With this one all purpose blade you can RIP & CROSSCUT 1' to 2' hardwood and softwood resulting in a smooth as sanded surface. Ply-veneers of oak and birch will crosscut with NO BOTTOM SPLINTER at moderate feed rates. Customized Forrest Woodworker 2 For Table Saws. For the advanced table saw operator. Ideal for joinery and special uses. Specially engineered clearances on the carbide teeth can totally eliminate side scoring. The result...no planing/jointing or sanding. In many cases a glue-line cut can be obtained, depending on the accuracy of the saw machine.20�� Face Hook for easy feedDOUBLE HARD and 40% STRONGER C-4 CARBIDE will give up to 300% longer life between sharpenings.Ends second-step finishing (jointing and sanding not required).Buy and sharpen ONE blade instead of 3, (24T Rip, 50T Combination, 80T Crosscut).Ends cutting 1/16' oversize to allow for RESURFACING
Customer Reviews
Most helpful customer reviews
1 of 1 people found the following review helpful.
Best Blade I've ever owned
By Mr. Christopher C. Mercado
I have a couple of the Chopmaster blades which I thought were the best. Doing side by side comparisons do show that this blade cuts smoother. They are nothing short of amazing. Will definitely buy again.
1 of 3 people found the following review helpful.
A lot Smoother than Dewalt 60T Combination Blade on DW708
By junkshop
Buy it at Amazon for 55% of MSRP,cheaper than forrest chop masterand come with 5/8" arbor fit my Dewalt SCMS.I use this blade on Dewalt SCMS (slide chop miter saw) DW708.DW708 comes with 60T blade. This blade is a lot heavier.Cut smoother than Dewalt 60T & straighter(I don't know why, but my square ruler confirms it)Does get burn mark on 2" or thicker?If you cut anything above 2" thick,maybe should go with chop master or fewer teeth blade.This blade is not recommended for slide miter saw according to ForrestBlade website. I don't have any problem with my slide miter saw.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
